2 overlapping curves – Metrohm 796 Titroprocessor User Manual
Page 228
Advertising
10.2 Overlapping curves
796 Titroprocessor, Instructions for use
222
222
The <é> or <ê> keys switch the graphics cursor off again.
These functions are also available for overlapping curves.
10.2 Overlapping curves
Several curves of the same type (same methods, same modes, same
presentation size) can be overlapped and compared on the screen.
Make sure that the corresponding determinations are loaded in the working
memory. Use the file manager for this if necessary.
•
First select a curve to be displayed with the ([Select file]) softkey.
Set the display parameters so that all curves can be shown ( [*Param]
[Curve display]
) softkeys. If 'auto' is selected for the axis scaling
then all curves will be adapted automatically.
Advertising