Metrohm 796 Titroprocessor User Manual
Page 227
10. Curves and re-evaluation
796 Titroprocessor, Instructions for use
221
221
[Sample
data]
opens an entry window for altering the sample data.
ЪДДД
Sample data
ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ User Run number 001 ³
³ ³
³ Method Ident1 Ident2 Ident3 Size Unit ³
³ ³
³ Remark ³
³ ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
[Show
cursor]
selection of a graphics cursor for displaying the data of
the individual measuring points or equivalence points.
Select 'M.pts' or 'EPs', see below.
Graphics cursor
With the [Show cursor] softkey a line cursor can be switched on which
can ‘wander’ along the measuring curve, i.e. a vertical line cursor can be
moved from one measuring point to the next with the <ç> and <è>
keys. The corresponding values for measurement, volume, endpoint
criterion (for DET) and time are indicated for the particular measuring point
chosen.
The same function is available for the display of equivalence points. A
cross-wires cursor shows the corresponding data of the different
equivalence points.