Metrohm 796 Titroprocessor User Manual
Page 21
1. Introduction
796 Titroprocessor, Instructions for use
15
15
Tip:
If the edit mode (entry on the configuration page, or press the <INS>key) is
set to 'overwrite', you can simply type in the first letter or the first two letters
of an entry item and press
<ENTER> to change the content of an entry field
with a selector list. If this entry can be uniquely assigned to an item of the
selector list, it will be automatically completed.
Example:
To change the destination memory of data files for use with the auto save
function, set the field cursor to the destination field on the Titroprocessor's
main page. Type 'd' then and press the
<ENTER>key. The entry of the de-
stination field will be set automatically to 'Data card'.
This is the quickest way to modify entry fields .
1.6.1 Navigation in edit mode
In edit mode the cursor keys
<з
з
> and <и
и
> allow the navigation within an
entry field. To access other fields in the same line use the
<TAB> key or the
<Shift><TAB> key combination, respectively. The cursor keys <к
к
> and
<й
й
> allow vertical navigation.