Metrohm 796 Titroprocessor - Manual (Page 264)

12.2 Remedying storage errors
796 Titroprocessor, Instructions for use 258 258
Warning:
Only switch off the 796 Titroprocessor in the ready condition (* ready *),
never during a running determination or saving process.
When the instrument is switched on various error messages can appear.
The following message appears if data from one determination only are af-
fected:
WARN. DETSTORE: Determination x.x corrupt. Clear working memory ?
In this case the error can be remedied in the following way:
WARN. DETSTORE:
Determination 1.1 corrupt.
Clear working memory ?
Working memory
is cleared.
Corrupted Determi-
Bestimmung
nation is cleared.
Y N
Main
page
Power
on
Determination
defect
If the query is answered with <N> then only the data in the defect determi-
nation will be deleted; this is normally sufficient. If the Titroprocessor should
then behave irregularly, delete the working memory by initializing the stati-
stics function. Enter
Statistics 'rst' on the main page.
If a serious memory error occurs the following error message appears:
WARN. DETSTORE: Corrupt memory detected. continue anyway ?
This query can be answered with <Y>, but the Titroprocessor may then be-
have irregularly. You have the possibility of saving your data.
If the query is answered with
<N>, then proceed as follows: