Metrohm 796 Titroprocessor - Manual (Page 116)

7.5 SEC Endpoint conditioning
796 Titroprocessor, Instructions for use 110 110
Example:
SEC_U* SEC_U* ДДДДДДДДДДДДД ДДДДДДДДДДДДД¿ ¿
CTRL_RS1 ... | CTRL_RS1 ... |
... SEC_U*
... SEC_U*
... ...
... ...
WAIT_C ...
WAIT_C ... ДДДДДДДДД ДДДДДДДДДЩ Щ
ASK ASK
SET_U*
SET_U*
The WAIT_C command synchro-
nizes the background conditioning
process with the method being car-
ried out in the foreground. The
WAIT_C command interrupts the
regular method run until the back-
ground process (conditioning) has
been completed.
Note! Every titration, measuring or calibration mode also terminates back-
ground conditioning. Achievement of the conditioned state is not taken into
account.
The various parameters for the SEC modes are described in detail
on pages 154 to 157.