Metrohm 796 Titroprocessor - Manual (Page 226)

10.1 Single curves
796 Titroprocessor, Instructions for use 220 220
[Add
curves]
shows the selection list for similar types of determination
contained in the working memory. If a curve is selected it
will be added to the curve already shown.
[Records]
opens a selection list with the available curves for the
current determination, i.e. those titrations or
measurements which have been carried out in the actual
determination. After confirmation with
<ENTER> the
selected curve will be shown.
[*Param]
allows the EP recognition criteria and the curve display to
be processed.
ЪДДДДДДДВДДДДДДДВДДДДДДД¿
³ EP ³Curve ³ ³
³Recogn.³display³ ³
АДДДДДДДБДДДДДДДБДДДДДДДЩ
See pages 139ff and 142ff. Please note that the curve
presentation on the time axis is only possible if time
recording was switched on for the corresponding
determination, see page 135.
[*Formula]
opens the dialog window for altering the calculation
formulas for recalculations, see page 119ff.
[*Report]
opens the dialog window for altering the reports of the
selected data records.
[Local
ComVars]
opens the dialog window for altering the local common
variables. These are copies of the common variables valid
at the time of the determination.
[Calib.
data]
opens a window for displaying the calibration data for pH
measurements and pH titrations.
ЪДДД Calibration data ДДДДДДДДДДДДДДДДДДДДДДДДДДДД¿
³ ³
³ Meas. input A1 ³
³ Cal. sensor ³
³ Cal. method manual ³
³ Cal. date 99-12-10 ³
³ Cal. time 14:19:08 ³
³ Temperature 25.0 §C ³
³ pH(as) 6.956 ³
³ Slope 0.998 ³
³ ³
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД QUIT ÄÙ
These are the calibration data which were valid at the time
of the determination.
[>> >>]
switches to the second softkey bar.