Epiphan Networked VGA Grid - Manual (Page 118)

Networked VGA Grid User Guide 3-1 Create and configure channels
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. From the web interface, scroll to the Channels menu option.
4. Click on the channel you want to rename; the menu expands.
5. Click any link for the channel; the corresponding channel status or configuration page opens.
You can change a channel's name from any of it's configuration pages.
3. Click the channel name at the top of the channel configuration page; the name text becomes red to
indicate that it is editable.
4. Highlight the old name and press backspace or delete on the keyboard.
5. Type the new name, using alphanumeric characters. It's recommended (but not mandatory) that you
use underscores to separate words, if needed.
6. Press Enter on the keyboard. The name is updated at the top of the screen and in the list of Channels in
the navigation menu.
You must press the Enter key on the keyboard for the change to take effect.
106