Epiphan Networked VGA Grid - Manual (Page 192)

Networked VGA Grid User Guide 5-2 Create Recordings
5. Click the Reset button next to the stop button; the current file is stopped and a new one begins.
6. Refresh the page to see the new recorded files list.
Control recording with a mouse
You can physically control recording start/stop by connecting a USB mouse to your Networked VGA Grid.
To control recordings with a mouse:
1. Power on the system.
2. Connect a USB mouse to a USB port on the system.
3. Click the left mouse button once to start recording; recording starts (on all channels and recorders). If
desired, check the web interface to see that recording is started.
4. Click the left mouse button again to stop recording. If desired, check the web interface to see that
recording is stopped. See View the List of Stored Files
180