Epiphan Networked VGA Grid - Manual (Page 289)

Networked VGA Grid User Guide 7-11 Configuration Keys for Third Party APIs
Table 52 Supported Stream Publishing Configuration Keys
Key Values Description
publish_type 0 (do not publish)
1 (via Epiphan.tv)
2 (RTSP Announce)
3 (multicast RTP/UDP)
4 (multicast MPEG-TS
over UDP)
5 (multicast MPEG-TS
over RTP/UDP)
6 (RTMP push)
Specifies the type of stream publishing, if any.
RTSP Announce Configuration Keys (Publish Type 2)
The following settings are supported when the publish type is set to RTSP Announce. For more information on
RTSP and these settings, see Stream your video .
Table 53 Supported RTSP Announce Configuration Keys
Key Values Description
announce_by_tcp on
empty string ("")
Enables or disable RTSP over TCP. To enable TCP transport, set
to on. Otherwise, set to empty string ("").
announce_host string Specifies the RTSP server address. Set to the appropriate IP
address.
announce_name string Specifies the RTSP resource name. (This field is named Mount
Point in the web interface.)
announce_
password
string Specifies the password for the RTSP server's user.
announce_port 1000...65535,
but not 5557
Specifies the RTSP server port to connect to for streaming. Note
port 5557 is used for network discovery and cannot be used for
streaming.
announce_
username
string Specifies the username for the RTSP server. Value is provided by
the RTSP server.
277