Epiphan Networked VGA Grid - Manual (Page 85)

Networked VGA Grid User Guide 2-2 Configure a video source
The following values are configurable for digital sources connected to the DVI port:
Value Description
Interval between
VGA signal and
autoadjustments
(sec)
When a source is setup, the system automatically detects and adjusts the image
capture settings at start up and continues to adjust every 60 seconds during
operation. To change the number of seconds between update, enter a value, or
0 to disable the feature, otherwise the default of 60 seconds is set.
Rotate This feature is useful when a source captures video that is rotated 90⁰ or is
displayed upside down. Choose one of the following values to change the video
orientation while streaming:
l
No rotation
l
90⁰ clockwise
l
90⁰ counter clockwise
l
180⁰
Enable
deinterlacing
Enable this feature to convert an interlaced source signal to a non-interlaced
signal.
VGA Signals (coming in via DVI port)
The following values are configurable for VGA signals coming in via a DVI port.
73