Epiphan Networked VGA Grid - Manual (Page 208)

Networked VGA Grid User Guide 5-4 File and recording transfer
Name Description / Options
Server share The name of the shared folder on the CIFS server.
Domain The CIFS server's Windows domain or Work Group name . Needed if the server is part of
Active Directory or a Domain Controller.
Login Username for the CIFS server.
Password Password for the CIFS user.
Use temp file Causes files to be named with .part extension on the server during active upload. When the
upload completes, the file is renamed to the appropriate extension (.mov, .mp4, .ts or .avi).
Configure AFU to a secure FTP server (part 2 of 3)
This procedure assumes you have completed the steps in Enable and configure the frequency of AFU (part 2 of
3) and wish to continue with configuration of upload to a secure FTP Server (SFTP).
To configure upload to a secure FTP (SFTP) server:
1. Select SFTP Client from the protocol drop down list in the Automatic File Upload configuration page;
the lower half of the page reflects the selection.
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure Network Settings ), you can use the server’s fully qualified domain name
instead of the IP address.
3. Specify the Server Port used for the target SFTP server. The standard port is 22.
4. Enter the SFTP account username in the Login field.
196