Epiphan Networked VGA Grid - Manual (Page 211)

Networked VGA Grid User Guide 5-4 File and recording transfer
The system accepts RSA keys for SSH-1; DSA, ECDSA, EC25519 and RSA for SSH-2.
Keys must be in OpenSSH format.
c. Click Upload to upload the file.
2. Use the Test your key field to test your uploaded key against the secure server, if desired.
7. Click Apply; if there are any problems the system notifies you with a message: One or more parameter
values are not valid and those were not applied!
The following table describes the options applicable to configuring upload using SCP.
Table 32 SCP Automatic Upload Configuration Options
Name Description / Options
Server address The IP address (or fully qualified domain name) of the destination server.
Server port The SCP port used by the target server. Standard port is 22.
Login Username for the SFTP server.
Password Password for the SFTP user.
Upload to an external USB drive
The system is equipped with USB ports that can be used to copy files from internal storage to external USB
flash drives or hard drives. An example use of this feature is to provide speakers with a copy of their
presentation before they leave the presentation venue.
The external drive must be formatted with one of the following file systems:
l
FAT16
l
FAT32
l
XFS
l
EXT2
l
EXT3
l
EXT4
Only the first attached USB drive is used for automatic file upload. If more than one USB drive is
attached before system power up, behavior is unpredictable.
File transfer to a USB drive occurs in one of the following ways. This section describes the procedures.
l
AFU to a USB drive (part 2 of 3)
l
One-time copy/move of all recorded files to USB drive
l
Manually copy recorded files to USB drive
199