Epiphan Networked VGA Grid - Manual (Page 51)

Networked VGA Grid User Guide 1-3 Configure Network Settings
To ping or traceroute an IP address:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. Select the Network link in the Configuration menu; the network configuration page opens.
4. Click ping or traceroute; an animation appears to the left of the address to indicate processing is
underway.
5. Upon completion of the command, read the results from the console-like display is shown below the
Network Diagnostics setting.
39