Hypertherm Phoenix 8.0 - Manual (Page 104)

Shape Manager
97
Teach Trace
The Teach Trace function of the CNC allows parts and remnants to be traced rather than
programmed. The position information from the traced part remains as a part program
that can be saved to disk.
The Teach Trace algorithms present in the CNC can recognize both arcs and lines. This
reduces the overall memory required to store these parts and improves the smoothness of
the cut. The traced part in memory is in EIA format and can be cut, saved or manipulated
using any of the part options.
Teach Trace has two modes, Remnant Trace and Teach Trace. The screen opens in
Remnant Trace mode. Press the Select Teach Trace Mode soft key to use Teach Trace.
Remnant Trace Mode
In Remnant Trace mode, you can trace the outline of a plate remnant and save it as a file
so that it can be used later and nests of parts can be cut from the remnant.
To trace a remnant:
1. On the TeachTrace screen, press the Select Remnant Mode soft key.
2. Jog to the point on the Remnant window where you want the trace to begin. Use the
joystick or jog keys to move the torch over the plate.