Hypertherm Phoenix 8.0 - Manual (Page 21)

Overview
13
• Programmable servo gains, speeds, Watch Window, machine parameters, and com-
munication parameters for flexible application.
• Interfaces easily to most optical tracing systems for integrated control.
• Complete built-in diagnostics for checkout and test.
Hardware Specifications
• 15” TFT Touch Screen with 1024 x 768 resolution.
• ≥60Gbyte hard disk
• ≥1.3 GHz Processor.
• 512 Mbytes of RAM.
• Up to 96 lines of interface signals for cutting and motion logic (gas control, tracing system,
markers, homing, etc.) depending on I/O configuration. An optional SERCOS Interface™
allows expansion of I/O configuration.
• Industrial grade enclosure and keypad designed to minimize RFI/EMI interference.
• Surface mount printed circuit board technology.
• Two axes optically isolated ±10VDC drive outputs and incremental encoder inputs which
are expandable to 6 axes of motion. Up to twelve axes of motion and 1024 I/O available
with optional SERCOS Interface. Optional axes available for dual gantry, dual transverse,
contoured bevel head, two rotate, two tilt angle and eight Sensor™ THC applications..
• +5VDC single ended or differential encoder inputs.
• Optically isolated serial ports with programmable baud rates to 115 K baud.
Communication baud rates of 230K are obtainable using the communication link software
provided with the control. Optional Network Card for connecting directly to a PC Network.
• Universal power input (100-240 VAC; 47-63Hz). Individual models may vary. Refer to
machine interface information for details.
• Operating environment: 0 to 50°C (32 to 122°F); 95% relative humidity (non-condensing).
• An optional Chiller for Mariner style controls is available.
Model Numbering System
The control is available with the following hardware and software configurations. Features and
control configuration options in software are based on the I/O configuration of the control.
Generally, the information presented in this guide is based on the I/O configuration as outlined
below. Please refer to your control I/O configuration for available features and product
information. The specific configuration is determined by the Model Number, as shown below: