Hypertherm Phoenix 8.0 - Manual (Page 406)

399
Phoenix Link
Overview
The Phoenix Link communication software is communication software on the CNC for
transmission of part and consumable database files between the CNC and the host
computer. The program uses a 2X compression feature that allows the communication
system to operate at speeds up to 230 K baud.
Phoenix Link
When the Phoenix Link communication software is operating, the following window
displays at the host computer for configuration. After the software is running, the
window can be minimized.
Port
Allows you to select the communication port on the host computer.
Baud
Allows you to select the baud rate for communication on the host computer. The
minimum baud rate is 9600 bps; the maximum baud rate is 115,200 bps.
Folder
Allows you to change the path of the Master folder (in the Parts folder). Subfolders and
the part files within this folder are viewed at the CNC.