Hypertherm Phoenix 8.0 - Manual (Page 134)

Files
127
Keypad operation: To select a different directory, use the
↑ and ↓ keys on the
keyboard. To add a new directory, use the + key on the keyboard. To remove a
directory, use the - key on the keyboard.
Note: This selection is only available if saving to the Diskette or USB memory stick from
the hard drive.
Files
Select one or more part files from the list of all the files that are in the Load from
directory that can be loaded from the disk. To remove a file, double-click on the touch
screen where indicated.
Keypad operation: To scroll through different files, use the
↑, ↓, PAGE UP and PAGE
DOWN keys on the keyboard. To remove a file, use the - key on the keyboard. To select
multiple files, highlight the first file selection, then use the
↑ and ↓ keys while pressing
the shift key to highlight the remaining files.
Note: This selection and Multiple file selection are only available if you are saving files
to the diskette or USB memory stick from the hard drive.
Hard drive file name
Enter the name that you are giving to the file if you are loading it on the hard drive.
Note: This selection is only available if you are saving files to the diskette or USB
memory stick from the hard drive.
Preview
Check this box to preview the file that is selected in the Files listbox.
Keypad operation: To check or uncheck the box, press the SPACE key on the keyboard
when the Preview box has the focus.
Note: This selection is only available if you are saving files to the diskette or USB
memory stick from the hard drive.
After you have made all your selections and entries, press OK to save the part.
Save Log to Disk
This feature is enabled when Key Logging is selected in setups.
The Key Logging feature is used as a diagnostic tool to record key presses that are made
at the control during operation. When this feature is enabled, all key presses and
application faults are saved in a daily log file that can be sent to the control manufacturer
for evaluation.