Hypertherm Phoenix 8.0 User Manual

Page 160

Advertising
background image

Library Shapes

153

Base Width
Enter the width of the base of the part.

Left Slant Width
Enter the width (measured horizontally) of the left, slanted side of the part.

Overall Height
Enter the height of the part from the base to the point at the top.

Side Height
Enter the height of the sides of the part.

Lead-In/Lead-Out Length
Enter the appropriate value to ensure proper piercing (lead-in) and gas bleed-off (lead-
out) to obtain optimum cut quality.

The location for the lead-in and lead-out is fixed, but can be changed by using the
ShapeWizard and then saving the new shape to disk.

Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.

Advertising
This manual is related to the following products: