Hypertherm Phoenix 8.0 - Manual (Page 387)

Password Setups
380
Power Supplies
None
HD4070 Torch 1or 2 Powermax series
Max100/ 100D HT4001 FineLine 100
Max200 HT4100 FineLine 200
HT2000 HT4400 Other (any other plasma system)
HD3070 HPR130
Marker
None
ArcWriter
FineLine 100 & 200
HD4070 Torch 1or 2
HPR130
Other (any standalone marker)
Laser
Rofin RF 40 & 50
Rofin DC 35
Rofin TR 60
Other
Set the Station Select Override feature in Cutting Setups to Disabled to override station
selections with manual inputs.
Set the Process Select Override feature in Cutting Setups to Disabled to override process
selections with manual inputs.
Overview
1. Press the Stations 1-4 or Station 5-8 soft key to access a station.
2. Select the appropriate lifter station from the list of available lifter types.
3. Select the appropriate tool (plasma power supply or marker tool) the station from the
list of available tools in the Plasma and Marker Process fields. The tool selection
should reflect the actual tools in use for that individual lifter. The Station can be
configured so that all four plasma and marker processes operate on one station or are
distributed throughout all 8 stations.
4. If necessary, use the Reset soft key to reset or clear all station setup parameters
setting the values to None.