Hypertherm Phoenix 8.0 - Manual (Page 315)

Diagnostics
308
Control Information
The control Information section displays the Hardware Key number, the control model
number, serial number, control I/O type, axes enabled and I/O enabled.
Software Modules
The Software Modules information displays the optional software features which have
been loaded or have been enabled for use, such as DXF Translator, McAfee VirusScan
Software, or NJWIN font Viewer.
Voltage
System Voltages at the motherboard are displayed for motherboards equipped with this
monitoring feature.
Temperature
Temperature at the motherboard is displayed for motherboards equipped with this
monitoring feature.
Fans
Fan speeds at the motherboard are displayed for motherboards equipped with this
monitoring feature.
Limited Version
The Limited Version information is displayed if the control is operating on a trial version
of the software. The version of software is available for 90 days and can enabled for
permanent use with a password available from the control vendor.
THC Revision
The current Command THC Interface and Real Time Revision Levels are displayed at the
Control Information screen when enabled.
System Diagnostics
Press the System Diagnostics soft key to access the touch screen calibration utility for
tuning touch screen response.