Hypertherm Phoenix 8.0 - Manual (Page 111)

Shape Manager
104
Cut Earlier
Pressing the Cut Earlier soft key will move the selected part program to an earlier
position in the part cut list. The sequence in which the parts are cut changes, but not the
selected part location in the nest.
Cut Later
Pressing the Cut Later soft key will move the selected part program to a later position in
the part cut list. The sequence in which the parts are cut changes, but not the selected
part location in the nest.
View Sheet / View Part
View Sheet allows the viewing of a part as it would appear on the plate. After pressing
the View Sheet soft key, the display window zooms out to show the part in relationship to
the entire plate.
After zooming out, the display can be zoomed in again by pressing the + key, which
causes horizontal and vertical scroll bars to be displayed. Pressing the - key will zoom
back out.
More information on use of this feature is provided in the Manual cutting section.
Arrow Key (Distance)
The Arrow Key allows the user to select one of five different preset move distances when
the arrow keys are pressed to locate parts in the nest. These five distances are definable
and are selected in the Nester setup screen.
Clear Nest
Clear Nest will delete all the parts located in the nested parts list from temporary
memory.
Setup
Pressing the Setup soft key accesses the Nester setup screen for configuring the variable
parameters when using Nester.