Hypertherm Phoenix 8.0 - Manual (Page 525)

Automatic DXF Import
518
If the file contains no pierce or lead-in /lead-out information, the HyperDxf utility
prompts the user for this information. For more information, see Raw DXF Files.
Note: To load DXF files the DXF extension must first be added to the Special Setups
screen.
Raw DXF Files
If the control does not detect pierce information in the DXF file, the operator has the
option to use the Hyper DXF translation utility to import the file and add - and lead-out
information.
If the user selects YES, a configuration screen displays fields to define the lead-in/ lead-
out format.
Lead Type
Select a Straight or Radius lead-in or lead-out.
Length / Radius
Select the lead-in or lead-out length or radius.
Angle