Hypertherm Phoenix 8.0 - Manual (Page 302)

Pause
295
Last Electrode Installed
Displays the date and time when the selected electrode was installed.
New Torch Tip
Press the New Torch Tip soft key to select which Torch Tip has been replaced and to
update the database.
New Electrode
Press the New Electrode soft key to select which Electrode has been replaced and to
update the database.
Setups
Press the Setups soft key to access the control setups and adjust the cutting process.
Reset Database
Resets the values in the database on the control and clears the torch tip or electrode
information after uploading or saving the database.
Upload Database
Uploads the current database to a host computer running our link.
Save Database
Saves the current database to the diskette or USB memory stick.