Hypertherm Phoenix 8.0 - Manual (Page 216)

Library Shapes
209
Radius to Left Side
Enter the distance between the left sides of the part and the radius.
Radius Diameter
Enter the diameter of the radius.
Radius to Right Side
Enter the distance between the right sides of the part and the radius.
Height
Enter the height of the part.
Lead-In/Lead-Out Length
Enter the appropriate value to ensure proper piercing (lead-in) and gas bleed-off (lead-
out) to obtain optimum cut quality.
The location for the lead-in and lead-out is fixed, but can be changed by using the
ShapeWizard and then saving the new shape to disk.
Part Type
Indicate whether you want to cut the part as a separate piece or a hole in a larger part.
Chain cut options are available for simple shapes that have external cut paths.