Hypertherm Phoenix 8.0 User Manual
Page 33
Overview
25
While the scroll bars are displayed and the control is not cutting, the view of the plate can be
shifted horizontally and vertically by pressing and moving the scroll bar or by holding down a
shift key and pressing the arrow keys on the keypad. While the control is cutting, the view will
automatically be shifted as the cut path reaches one of the edges of the view. This mode is
useful in normal cutting to closely follow the cut-path while in zoom.
View Sheet is more useful when proper Plate Size values have been entered in Cutting Setups.
Change Cut Mode
Allows selection of trial, oxy fuel, plasma, water jet and laser cutting modes, depending on the
setup configuration.
Change Consumable
This soft key takes you to the Change Consumable screen.
Zero Positions
This soft key zeros the current positions on the Transverse and Rail axes as well as the Dual
Gantry axis if used.