Hypertherm Phoenix 8.0 - Manual (Page 400)

Password Setups
393
Scan Hard Disk
Press the Scan Hard Disk soft key to scan the hard drive for viruses or disk errors using
Norton antivirus software.
Select Yes to scan the hard drive for viruses using Norton anti-virus software.
Select No to scan the hard drive for errors and correct them using the Windows XP
CHKDSK (check disk) utility. This task should be performed approximately every three
months depending on the number of files loaded to and removed from the control.
The Check Disk (CHKDSK) function cannot operate while the CNC software is in
operation. You will be prompted to press “Y” (for yes) to check the disk the next time
that the CNC boots up.