Hypertherm Phoenix 8.0 - Manual (Page 122)

Shape Manager
115
Note: The nest process progresses quickly and not all shapes may be visible on screen or
other drawing anomalies may be noted during the nesting process.
In the event that more parts are selected than can fit on one plate, multiple plates or sheets
(nested program) files will be generated and saved in the selected folder with the selected
file name, but a numeric suffix will be added. Example: saving the part file as Nest may
generate multiple part files named NEST1.txt, NEST2.txt, NEST3.txt, etc.
Remove Part
A part may be removed from the part files list by highlighting the selected part in the files
list and pressing the Remove Part soft key prior to executing the nesting.
Note: The software feature on the CNC is protected by a hardware key or dongle. If the
hardware key has been removed from the CNC, the following message will appear when
the Nest Parts soft key has been pressed.