INFICON Cygnus Thin Film Deposition Controller - Manual (Page 100)

4 - 16
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
XTL FL INHBT (ON/OFF) ###
The ON action prohibits the Crystal Fail output relay from activating. This is
useful when changing crystals for the designated Channel ### (0 indicates all
Channels). The OFF action cancels the corresponding ON action.
ZERO THICK ###
This Action is identical to selecting the ZERO THICKNESS key in the Channel
display. The Action will zero the thickness accumulated on the display for the
designated Channel ###. A value of 0 will zero the thickness on all channels.
4.5 Counters Timers
Figure 4-9 Display Tree for Counters Timers
Figure 4-10 Timers Counters
COUNTERS / TIMERS Display Function Keys
F1 ZERO COUNTER TIMER
To set the value of the selected timer to 00:00, select function key F1.
F2 START TIMER
To start the selected timer, select function key F2.
F3 CANCEL TIMER
To stop the selected timer, select function key F3
F6 LOGIC DIRECTORY
To move to the LOGIC DIRECTORY display, select function key F6.
ALL CHANNELS
GENERAL PARAMETERS
LOGIC DIRECTORY
COUNTERS TIMERS