INFICON Cygnus Thin Film Deposition Controller - Manual (Page 30)

1 - 16
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
1.4.11 Operating Environment
Usage. . . . . . . . . . . . . . . . . . . . . . . . Indoor only
Temperature . . . . . . . . . . . . . . . . . . . 0 to 50 °C (32-122 °F)
Humidity . . . . . . . . . . . . . . . . . . . . . . Up to 85%RH, non-condensing
Altitude . . . . . . . . . . . . . . . . . . . . . . . Up to 2000 meters
Installation (Overvoltage) . . . . . . . . . Category II per IEC 664
Pollution Degree. . . . . . . . . . . . . . . . 1 per IEC 664
1.4.12 Storage Temperature
Storage Temperature . . . . . . . . . . . . -10 to 60 °C (14 to 140 °F)
1.4.13 Warm Up Period
Warm Up Period. . . . . . . . . . . . . . . . None required;
For maximum stability allow 5 minutes.
1.4.14 Size
Not including mounts or user connectors
5.25" H x 17.625" W x 17.3" D
(133.4 mm H x 447.7 mm W x 435.1 mm D)
Including mounts, but no user connectors
5.25" H x 18.85" W x 17.3" D
(133.4 mm H x 478.8 mm W x 435.1 mm D)
1.4.15 Connector Clearance Requirements
Front. . . . . . . . . . . . . . . . . . . . . . . . . Minimum 1.0" (25.4 mm)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . Minimum 4.0" (101.6 mm)
1.4.16 Weight
With all options. . . . . . . . . . . . . . . . . 13.2 kg / 29 lb
1.4.17 Cleaning
Use a mild, nonabrasive cleaner or detergent taking care to prevent cleaner from
entering the unit.