2 general parameter display – INFICON Cygnus Thin Film Deposition Controller User Manual
Page 86
Advertising
4 - 2
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
4.2 General Parameter Display
The GENERAL PARAMETERS display is shown in
.
Figure 4-2 GENERAL PARAMETERS Display
GENERAL PARAMETERS Display Function Keys
F1 LOGIC DIRECTORY
To access the Logic Directory display, press function key F1.
F2 I/O MAP
To access the I/O Map display, press function key F2
F3 FLOPPY DISK
To save or load files from the floppy disk, press the F3 function key to access
the Floppy Disk display.
F6 ALL CHANNELS
To move to the All Channels Data display, press function key F6.
Advertising