INFICON Cygnus Thin Film Deposition Controller - Manual (Page 127)

5 - 23
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
5.4.3.6 Output Name Parameters
5.4.3.6.1 Query Output Names
Query: The message format is:
QO<Output Number>
Output Number = <byte> 0 to 38 (0 = All Outputs)
Command Response:
If Output Number was 1 to 38:
ACK<Output Name>|<Response Error Code>
If Output Number was 0:
ACK<Output 1 Name><Output 2 Name>...<Output 38 Name>|<Response
Error Code>
Output Name = <string> Up to 10 characters, null terminated.
5.4.3.6.2 Update Output Names
Update: The message format is:
UO<Output Number><Output Name>|<Output Number = 0><Output 1
Name><Output 2 Name>...<Output 38 Name>
Output Number = <byte> 0 to 38 (0 = All Outputs)
Output Name = <string> Up to 10 characters, null terminated
Command Response:
ACK|<Response Error Code>
NOTE: Output Names may only be updated if all channels are in Ready or Stop
and are not crystal switching on any channel.
Increment Counter x Increment Counter x (x = 1 to 20) 0x4F
Start Deposit n Start Deposit n 0x50
Goto NonDep Cnt n Go to Non-Deposit Control n 0x51
Goto Post Dep n Go to Post Deposit n 0x52
Continue Dep n Continue Deposit n 0x53
RW Sample ON s Leave RateWatch hold. (Can’t return
to hold until turned off.) 0x54
RW Sample OFF s Allows return to RateWatch hold. 0x55
Table 5-7 Action Codes (continued)
Name Description Code