2 remote general action commands – INFICON Cygnus Thin Film Deposition Controller User Manual
Page 139
5 - 35
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
5.4.5.2 Remote General Action Commands
The message format is:
RG<Command ID>(<Action Value>)
Command ID = <byte> See Remote General Action commands below.
Action Value = <byte>...<byte>|<Integer>...<Integer>|<Float>...<Float>
Command Response:
ACK|<Response Error Code>
22
0x16
Clears all failed crystals except the current
crystal.
23
0x17
Reinitialize the crystal information
24
0x18
Rotate Sensor Head
Table 5-10 Remote Channel Commands (continued)
RC
Command
ID
Meaning
Action Value
Table 5-11 Remote General Action Commands
RG
Command
ID
Meaning
Action Value
1
(0x01)
Stop All
2
(0x02)
Reset All
3
(0x03)
Remote Lock On, i.e. No parameters can be
updated from the front panel.
4
(0x04)
Remote Lock Off
5
(0x05)
Set Logic Statement <Action Value> to True.
Only takes action if the Logic Statement Event is
set to "Computer Control", otherwise it is
ignored.
<Byte>
1 to 100