1 all channels sensor maintenance display – INFICON Cygnus Thin Film Deposition Controller User Manual
Page 47
2 - 11
IP
N 07
4-
37
9-
P1
K
Cygnus Operating Manual
F3 CHANGE TIME/DATE
To access the display to edit the time and date for the instrument, press function
key F3.
F4 PROGRAM LOCK
To access a display for setting a program lock code, press function key F4.
F5 SENSOR MAINTENANCE
To access the All Channels Sensor MAINTENANCE display, see
Figure 2-7
,
press function key F5.
F6 ALL CHANNELS
To return to the ALL CHANNELS display, press function key F6.
2.3.1.2.1 All Channels Sensor MAINTENANCE Display
This display provides a simple way to view sensor information for all the sensors
as well as providing general sensor maintenance functions.
Figure 2-7 All Channels Sensor MAINTENANCE Display
All Channels Sensor Maintenance Display Function Keys
F1 CRYSTAL SWITCH
To initiate a crystal switch for the sensor indicated by the cursor position, press
function key F1.
F2 ROTATE XTAL HEAD
If the sensor number indicated by the cursor position is a CrystalSix, Crystal12,
or Rotary sensor, pressing F2 will sequentially rotate the sensor head through
all positions. This is useful to initialize a CrystalSix, Crystal12, or Rotary sensor
after replacing failed crystals.