Doremi ShowVault / IMB - Manual (Page 142)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 142 of 276 Version 1.7
Doremi Labs
Note: The red line on the bottom of the Touchscreen Calibration window indicates how much
time the user has left to complete the calibration process. If the calibration process is not
complete by the time the red line runs out, the process will stop and the program will exit out of
the calibration process (Figure 185).

Once the blinking dot turns into a cross, move onto the next blinking dot (Figure 186).
Figure 185: Touchscreen Calibration Window
Figure 186: Server LCD Screen Calibration

To abort without completing the calibration process, press Esc.

Once the calibration process is complete, the Touchscreen Calibration window will
automatically close. This will indicate that the calibration process was successfully
completed.
First Blinking Dot
Red
Line