Olby, Cp850, Accessing the dolby cp850 web gui – Doremi ShowVault / IMB User Manual
Page 266: 1 accessing the dolby cp850 web gui
____________________________________________________________________________________
SHV.OM.001663.DRM
Page 266 of 276
Version 1.7
Doremi Labs
23.10 Dolby CP850 Web GUI
23.10.1
Accessing the Dolby CP850 Web GUI
Follow the procedure below to access the Dolby CP850 Web GUI:
Open a Web browser on a MAC or PC that is on the same subnetwork as the CP850.
Figure 357: Dolby Audio Processor Login Screen
The default IP address will be required to access the Dolby Web GUI. Confirm the IP
address with your Dolby installer.
Caution:
Do not change the Dolby Atmos Input port IP address. Do not connect this port to an
ethernet switch. If you experience any difficulty, contact Dolby Support.
Once at the Dolby Web GUI homepage (Figure 357), a username and password will be
needed. Contact your local Dolby support to obtain proper credentials.
After logging in to the Dolby Web GUI, you will be taken to the Dolby Web GUI home-
screen (Status Screen), as shown in Figure 358.