Doremi ShowVault / IMB - Manual (Page 190)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 190 of 276 Version 1.7
Doremi Labs
15.4 Inserting Actions into Macro Cues

Go to Menu and click on Doremi Apps., then select Macro Editor.

Click the Insert a New Action button from the Macro Editor window (Figure 246).

The Add a New Action window will appear (Figure 248). The Add a New Action
window provides a list of available actions to be used within a Macro Automation
Cue.

To add an action to the Macro Automation Cue, click on its corresponding action
button in the left side of the Add a New Action window and click the Add button
(Figure 248).
Figure 248: Add a New Action Window

The Add a New Action window provides a list of available actions, on the left side, to be
used within a Macro Automation Cue. The actions available include the following:

Projector:
o Projector Channel Switch: Switch the selected projector channel.
o Projector Dowser: Open or close the selected projector dowser.
o Lamp: Power On or Off the selected projector lamp.
o Macro: Execute the macro defined in the selected projector.

Input/Output:
o General Purpose Output: Configure a GPO line.
o Send Message: Send a message to the connected device.

Playback:
o Audio Volume: Control the audio volume output.
o Chase Mode: enables synching of incoming time code
o Playback Actions: Change the playback state.
o RealD SBS: Enable or disable the RealD SBS output format.
o Sensio3D: Enable or disable the Sensio3D output format.
o Video Output Actions: Change the default video output format.