Doremi ShowVault / IMB - Manual (Page 254)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 254 of 276 Version 1.7
Doremi Labs
23 Appendix C: Dolby Atmos
This section provides instructions on how to setup and configure the ShowVault-3, ShowVault-4,
and associated IMB to use the Dolby Atmos feature.
23.1 Doremi Server Security Manager and Firmware Versions
The Doremi server and IMB will need to be at the following Security Manager (SM), Firmware
(FW), and Software (SW) versions.
ShowVault-3 and ShowVault-4 Servers
 SW: 2.6.4 (or latest version)
IMB
 FW: 30.07t (or latest version)
 SM: 5.1.107 (or latest version)
23.2 Dolby CP850 (Audio Processor) Software Version
The Dolby CP850 will need to be at the following Software (SW) Version:
 SW: SW V_1.2.0.8-831396 (or latest version)
23.3 Required Items
The following items are required for this procedure:

Doremi ShowVault Server
 Doremi IMB
 Dolby CP850 (Audio Processor)
 DLM (Refer to Section 2.4)
23.4 ShowVault Server Configuration
23.4.1 ShowVault Cable Configuration
Follow the procedure below for the cabling configuration: