Doremi ShowVault / IMB - Manual (Page 271)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 271 of 276 Version 1.7
Doremi Labs
Figure 363: Template Mapping Disabled
 If it is not disabled, click the drop down menu and select Disabled. Then click the Save
button (Figure 363).

Once saved, click the quit button to exit the Audio Configuration window (Figure 363).
23.11.2 Dolby Atmos Content Not Recognized
If the Dolby Atmos content is not recognized, a gray or red dot will be present in the Dolby
Atmos Content section (Figure 359).
Use the tips below to try and solve the issue:

Verify the selected content is Atmos content (Section 23.9).
 Verify the audio processor is Enabled (Section 23.7).
23.11.3 KDMs for Dolby Atmos Content (CPL)
All KDMs created to unlock encrypted Dolby Atmos content must have the audio watermark
disabled from only channels 12 and above.
Below is an example of what a correct KDM would look like:

<ForensicMarkFlagList>
<ForensicMarkFlag>
http://www.dcimovies.com/430-1/2006/KDM#mrkflg-audio-disable-
above-channel-12</ForensicMarkFlag>
</ForensicMarkFlagList
Quit
Button
Disabled
Save
Button