Doremi ShowVault / IMB - Manual (Page 244)

____________________________________________________________________________________
SHV.OM.001663.DRM Page 244 of 276 Version 1.7
Doremi Labs
22.5 Device Manager Configuration
To configure the ShowVault to operate in a Dual IMB setup, the following steps must be
performed.
Figure 320: Device Manager

From the ShowVault GUI, access the Device Manager by going to Menu → Doremi
Apps.
→ Device Manager (Figure 320).

In the Device Manager, add the Primary Projector (SM) by clicking the Add button
(Figure 321).

Set the Primary Projector (SM) Configuration:
o Set the Identifier: SM + name of the projector.
o Select the Projector Model from the drop-down.
o Specify the Head IP of the projector.
o Select Yes for Primary projector.
o Select Yes for Dual IMB.
o For 2D presentations, select Full from the Display drop-down.
 Note: For HFR 3D setups, select Left from the Display mode drop-down
(Figure 322).
o Click Save and type the appropriate password (Figure 321).
Device
Manager