Basler Electric DECS-400 - Manual (Page 207)

9369700990 Rev R 195
Logic Definitions
Logic definitions for DECS-400 inputs and outputs are described in the following paragraphs.
Logic Inputs
Start
Status indication of the dedicated start input (non-latching).
Stop
Status indication of the dedicated stop input (non-latching).
Contact Switches 1 through 10
Status indication of the 10 programmable inputs (non-latching).
AVR
Status indication of the dedicated auto input (non-latching).
Manual
Status indication of the dedicated manual input (non-latching).
Raise
Status indication of the dedicated raise input (non-latching).
Lower
Status indication of the dedicated lower input (non-latching).
PF State
Status indication of leading or lagging power factor (0=leading, 1=lagging).
Gen State
Status indication of generating or motoring operation (0=generator, 1=motor).
Null Balance
Indicates a null balance condition (1=active).
Pre Position 1
Indication that the active setpoint is at Preposition #1.
Pre Position 2
Indication that the active setpoint is at Preposition #2.
Unit Mode
Status indication of unit mode (0=off, 1=on).
FCR Mode
Status indication of FCR (0=off, 1=on) (DECS-400 does not need to be in Start).
AVR Mode
Status indication of AVR (0=off, 1=on) (DECS-400 does not need to be in Start).
VAR Mode
Status indication of VAR (0=off, 1=on) (DECS-400 does not need to be in Start).
DECS-400 Programmable Logic