Basler Electric DECS-400 - Manual (Page 245)

9369700990 Rev R 233
Software
Version and Date
Change
1.07.01, Feb-10
•
Expanded range of allowable generator ratings and protection
settings
1.07.03, May-11
•
Expanded Backward Compatibility
•
Expanded French Language interface
•
Improved UEL internal curve plotting
1.07.04, Jan-12 •
Minor improvements
1.08.03, Mar-13 •
Added PSS rate-of-change blocking function
•
Revised transient boost function—is now based on the voltage
setpoint instead of the rated voltage
•
Added reactive power limiter (VARL) function
•
Added adjustable traverse rate for the pre-position #1 and #2
setpoints
•
Added settings file converter to transfer DECS-300 settings into
DECS-400 settings file format
2.00.00, Aug-14
•
Added Windows 8 compatibility
Table 52. Instruction Manual Revision History
Manual
Revision and Date
Change
—, Jan-05
•
Initial release
A, Jul-05
•
Added cURus certification note to Section 1
•
Completed missing entries in Table 2-5
•
Added functional description of modem to Section 3
•
Updated BESTCOMS screen illustrations and setting
descriptions in Section 4
•
Added missing bit flag status information to Table B-12
B, Oct-05 •
Corrected DECS-400 terminal numbering in Figure 5-6, Typical
AC Connection Diagram
•
Updated Figure 5-4, Rear Panel Terminations, to show cURus
and CE logos
•
Updated BESTCOMS screens. See BESTCOMS changes
above for more details
C, Oct-06
•
Added backup battery specifications and burden specifications
for generator voltage sensing, bus voltage sensing, and
generator current sensing to Section 1
•
Updated the HMI menu shown in Figure 2-7
•
Added Field Temperature to the available metering parameters
listed in Section 3 and 4
•
Updated Figure 4-42, Test Signal Screen with new screen that
adds Var/PF to the list of available signal inputs
•
Widened the rated generator voltage range stated in Section 4
•
Added information to Section 5 regarding available mounting
hardware and an available isolation transformer
•
Replaced Figures A-2 through A-13 with revised, predefined
logic schemes
•
Added mode descriptions for registers 40611, 40612, 40613,
and 40617 in Table B-14
D, May-07 •
Added burden specification for metering outputs
•
Corrected watchdog terminal number references in Section 3
•
Corrected labeling of contact inputs SW7 and SW9 in Figure 5-9,
Typical DC Connection Diagram
•
Added descriptions for Modbus registers 40601, 40602, and
40603 to Table B-14
DECS-400 Revision History