IDEC FS1A Controller - Manual (Page 152)

LOGIC
5-104
Example: Control start input (X17) is used.
Safety input 1: X0
Start input 2: X17
(Control)
Monitor output for
safety input 1: Y4
State monitor output 3:
Y16
Solenoid output 1:
Y17
OFF delay time
Safety input 1: X1
Max. 6s
Initialization
note 1)
note 1)
Safety input 2:
X2, X3
Safety output 1:
Y0, Y1
Monitor output for
Safety output 1: Y12
Safety output 2:
Y2, Y3
Monitor output for Safety
output 2: Y13
Solenoid output 2:
Y20
Monitor output for
safety input 2: Y5
0.1s to 5s
Max. 0.1s
Power
ON
Safety output
ON
Safety output
ON
Safety output
ON
OFF delay time
(Either safety input 3 or 4 is ON, and both safety input 5 and 6 are ON in this chart.)