Dual channel safety input, Connects to, Description of operation – IDEC FS1A Controller User Manual

Page 365

Advertising
background image

LOGIC

5-317

Chapter 5

Dual channel safety input

This function is for connecting a safety device with a dual channel solid state output (PNP output),
such as a safety light curtain or a safety laser scanner, or a safety device with contacts such as an
emergency stop switch or an interlock switch. As shown in Fig. 5-7, this function is comprised of a
dual channel receive circuit (X

n

, X

n+1

) and a functional output (I

n

). Use safety devices with

diagnostic functions or prevent the short circuit of an input circuit. Because the drive circuit is not
used for this function.

-For safety device with dual channel solid state output (PNP out put)




-For safety device with contacts



Fig. 5-7 Circuit for dual channel safety input function

Connects to

Safety devices with dual channel solid state outputs (PNP output), such as safety light curtains or
safety laser scanners, or safety devices with contacts such as emergency stop switches or
interlock switches.

Warning

Safety performance depends on used safety devices.
Mechanical contact devices, such as emergency stop switches or interlock switches, cannot be
connected.

Note. Solid state output devices with sink outputs (NPN output) cannot be connected.

Description of operation

The operation timing is described in Fig. 5-8.

I When the dual channel safety check signals from the safety device are correctly supplied to

the 2 input receiving circuits, the output is turned ON. (Ex. Safety light curtain is not shaded.)

II When the safety check signal to either of the receiving circuits is turned OFF, the output is

turned OFF immediately. (Ex. Safety light curtain is shaded.)

III If safety check signals are not supplied correctly to the input receiving circuits, due to an error

in the safety device or input circuit, the output is turned OFF immediately. Status of the
detected error is displayed by the error LED, input LEDs and monitor output. (Ex. Fault in
the light curtain or wiring)

X

n

X

n+1

Safety device

I

n

V+
V-

Dual Channel Safety

X

n

X

n+1

I

n

V+
V+

Dual Channel Safety

Safety device

Advertising