Allied Telesis AT-S63 - Manual (Page 118)

Chapter 8: Port Mirroring
118 Section I: Basic Features
Disabling a Port Mirror
To disable a port mirror, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 20 on page 78.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 33 on page 114.
4. Click Modify.
The Modify Mirror page is shown in Figure 34 on page 115.
5. Click the Enable Mirror checkbox to remove the check and disable
the mirror.
6. Click Apply.
7. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)