Adding static unicast and multicast mac addresses, Figure 25: mac address tab (configuration) – Allied Telesis AT-S63 User Manual
Page 94
Advertising
Chapter 6: MAC Address Table
94
Section I: Basic Operations
Adding Static Unicast and Multicast MAC Addresses
This section contains the procedure for assigning a static unicast or
multicast address to a port on the switch. You can assign up to 255 static
MAC addresses per port.
To add a static address to the MAC address table, perform the following
procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab selected by
default, as shown in Figure 25.
Figure 25. MAC Address Tab (Configuration)
Advertising