Allied Telesis AT-S63 - Manual (Page 439)

AT-S63 Management Software Web Browser Interface User’s Guide
Section VII: Management Security 439
Global Server Timeout
This parameter specifies the maximum amount of time the switch waits
for a response from a TACACS+ server before assuming the server
cannot respond. If the timeout expires and the server has not
responded, the switch queries the next TACACS+ server in the list. If
there are no more servers, the switch defaults to the standard Manager
and Operator accounts. The default is 30 seconds. The range is 1 to
30 seconds.
IP Address and Encryption Key
Use these fields to specify the IP addresses and encryption secrets of
up to three network servers containing TACACS+ server software. You
can leave an encryption field blank if you entered the server’s secret in
the Global Secret field. The maximum length is 39 characters.
5. Click Apply.
6. From the Configuration menu, select the Save Config option to
permanently save your changes. (This option is not displayed if there
are no changes to save.)