Modifying an snmpv1 and snmpv2c community – Allied Telesis AT-S63 User Manual
Page 69
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations
69
Modifying an SNMPv1 and SNMPv2c Community
To modify an SNMPv1 and SNMPv2c community, perform the following
procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by default,
as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 175 on page
436.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 14 on page 64.
4. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 15 on
page 66.
5. Click the button next to the community name and click Modify.
The Modify SNMPv1 & SNMPv2c Community page is shown in
Figure 17.