Displaying the dos settings, Figure 82: dos tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 217
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations
217
Displaying the DoS Settings
To display the DoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 42.
2. From the Monitoring menu, select Network Security.
The Network Security page is displayed with the Port Security tab
selected by default, as shown in Figure 158 on page 397.
3. Select the DoS tab.
The DoS tab is shown in Figure 82.
Figure 82. DoS Tab (Monitoring)
4. Click the port whose DoS settings you want to view. You can select
more than one port at a time.
5. Using the DoS Type list, select the type of denial of service defense
whose settings you want to view.
6. Click View.