Allied Telesis AT-S63 - Manual (Page 64)

Chapter 4: SNMPv1 and SNMPv2c
64 Section I: Basic Operations
Enabling or Disabling SNMP Management
To enable or disable SNMP management on the switch, perform the
following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 175 on
page 436.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 14.
Figure 14. SNMP Tab (Configuration)