Allied Telesis AT-S63 - Manual (Page 53)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 53
Note
The AT-S63 management software default values are listed in
Appendix A, “AT-S63 Default Settings” in the AT-S63 Management
Software Menus Interface User’s Guide.
To return the AT-S63 management software to the default settings,
perform the following procedure:
1. From the home page, select Configuration.
The Configuring System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 38.
2. From the Configuration menu, select the Utilities option.
The Utilities page is displayed with the System Utilities tab selected by
default, as shown in Figure 10.
Figure 10. System Utilities Tab (Configuration)
3. Click the Reboot Switch After Resetting to Defaults checkbox.
4. Click Apply.
The web browser displays the following prompt:
This page may no longer be available while the switch
reboots. Do you want to continue?